• Easy access to mechanical parts through large access doors
• Safety stand if dump bed is raised for service
• Highly visible warning, caution and danger decals
• 350 amp fuse and block
• Heavy-duty bent tube headache rack
• Heavy duty 2-5/16”, 30,000 pound rated hitch ball with 1″ rise
• 23’ tethered hand-held control pendant
• Ruggedly built all steel construction
• Grab handles on either side of headache rack
• D-ring tie downs
• Highly visible lighting system
• Bolt-on receiver hitch

37N Dump Flatbed
87.25″ wide x 82.75″ long
The 37N bed fits single-wheel trucks with a very short bed. It has a 37” cab-to-axle measurement.

37W Dump Flatbed
95.5″ wide x 87.75″ long
The 37W bed fits dual-wheel trucks with a very short bed. It has a 37” cab-to-axle measurement.

42N Dump Flatbed
87.25″ wide by 87.75″ long
The 42N bed fits single-wheel trucks with a short 6’ bed. It has a 42” cab-to-axle measurement.

42W Dump Flatbed
95.5″ wide x 87.75″ long
The 42W bed fits dual-wheel trucks with a very short bed. It has a 42” cab-to-axle measurement.

56N Dump Flatbed
87.25″ wide x 106.25″ long
The 56N bed fits a single-wheel truck with a standard 8’ bed. It has a single wheel and a 56” cab-to-axle measurement.

56W Dump Flatbed
95″ wide x 106.25” long
The 56W bed fits a dual bed truck with an 8′ take-off bed. This is often called a bed delete truck because it came from the factory with a bed on it.

60N Dump Flatbed
87.25″ wide x 110” long
The 60N bed fits a true cab and chassis one-ton truck with single wheels and a 60″ cab-to-axle measurement. It has a straight frame.

60W Dump Flatbed
95.5″ wide x 110” long
The 60W bed fits a true cab and chassis one-ton truck with dual wheels, and it has a 60” cab-to-axle measurement. This truck comes from the factory with no bed. It has a straight frame.

84W Dump Flatbed
95.5″ wide x 140″ long
The 84W bed fits dual-wheel cab chassis trucks with an 84” cab-to-axle measurement. It has a straight frame.

Warranty

C5 Manufacturing, LLC warrants to the original purchaser of the C5 Manufacturing bed to be free of defects in material and craftsmanship for a period of one year from the date of purchase. We offer a bumper-to-bumper warranty for one year. After the bumper-to-bumper, there is a lifetime warranty on the arms. Hydraulic powertrain and their components are warranted for two years. This includes the power unit, manifold, cylinders, and hoses.

There is no warranty if the bed is not installed by an authorized C5 Manufacturing dealer. Any parts determined by C5 Manufacturing to be defective will be replaced. Shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer. For dealer information, please see our website, www.c5mfg.com.

Warranty for replacement or repair shall not extend the original vendor warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance, or operation beyond the rated capacities or intended uses. The warranty card must also be completed and returned to C5 Manufacturing within 30 days of purchase.

Please contact C5 Manufacturing for information about replacement parts.