New Power Unit
A new, faster electric over hydraulic power unit is standard with every Rancher Bale Bed. With piloted check valves on each hydraulic circuit and a 12 percent faster power unit, the Rancher Bale Bed will move your hay safely and faster than ever before.

Synchronized Arm Cylinders
The Rancher Bale Bed uses phasing arm cylinders to create synchronized arm movement. Unlike the independent arm control of the Chisholm Trail Bale Bed, the Rancher Bale Bed arms go in and out together. It’s a simpler, more economical system.

Free-Float Arm System
The free-float arm system allows you to unroll hay while maintaining full contact with the ground over rough terrain. This function helps to prevent skips and thick blankets of hay, allowing even distribution of feed and reducing waste.

Locking Valve System
The power unit on every Rancher Bale Bed utilizes piloted check valves on all hydraulic circuits, ensuring a safe way to haul and unroll hay.

Additional Features

• Two lifetime-guaranteed toolboxes, either Chandler or RKI
• Tethered hand control
• All LED lighting
• Rattle-free doors
• 30,000 Rated gooseneck hitch
• Spinners
• 1/8” Treadplate floor
• Mudflaps
• Sideboards
• Lifetime guarantee on bale arms
• 350 Amp fused power train
• D-ring tie-down rings on each side of the bed
• Urethane primer and paint

• Easy access to the powertrain through large access doors
• Highly visible warning and caution decals
• 350 Amp fuse and block attached to the truck frame
• Heavy-duty bent tube headache rack
• D-ring tie downs

The Rancher Bale Bed is available in nine different sizes:

37N Bale Bed 
7’ wide x 7’4” long
The 37N bed fits single-wheel trucks with a very short bed. It has a 37” cab-to-axle measurement.

37w Dump Flatbed
8’ wide x 7’4” long
The 37w bed fits dual-wheel trucks with a very short bed. It has a  37” cab-to-axle measurement.

42N Bale Bed
7′ wide x 7’8″ long
The 42N bed fits single-wheel trucks with a 42″ cab to axle measurement. These trucks are referred to as “shortbed” trucks.

42w Bale Bed
8′ wide x 7’8″ long
The 42W bed fits dual wheel trucks with a 42″ cab to axle measurement. These trucks are referred to as “shortbed dually” trucks.

56N Bale Bed
7′ wide x 8’10” long
The 56N bed fits single-wheel trucks with a 56″ cab to axle measurement. These trucks are referred to as “longbed” trucks.

56W Bale Bed
8′ wide x 8’10” long
The 56W bed fits a dual-wheel truck with a 56″ cab to axle measurement. These trucks are referred to multiple ways: “dually bed” or “bed delete” trucks.

60N Bale Bed
7′ wide x 9’10” long
The 60N bed fits a cab and chassis one-ton truck with single wheels and a 60″ cab to axle measurement.

60W Bale Bed
8′ wide x 9’10” long
The 60W bed fits a dual wheel cab and chassis one-ton truck with a 60″ cab to axle measurement. These trucks are referred to as “cab chassis” trucks. This truck comes from the factory without a bed. It has a straight frame.

84W Bale Bed
8′ wide x 11’10” long
The 84W bed fits a dual wheel cab and chassis truck with 84″ cab to axle measurement. It has a straight frame.

• Wireless remote control

Warranty

C5 Manufacturing, LLC warrants to the original purchaser of the C5 Manufacturing bed to be free of defects in material and craftsmanship for a period of one year from the date of purchase. We offer a bumper-to-bumper warranty for one year. After the bumper-to-bumper, there is a lifetime warranty on the arms. Hydraulic powertrain and their components are warranted for two years. This includes the power unit, manifold, cylinders, and hoses.

There is no warranty if the bed is not installed by an authorized C5 Manufacturing dealer. Any parts determined by C5 Manufacturing to be defective will be replaced. Shipping and handling are the consumer’s responsibility. For replacement parts, please contact your dealer. For dealer information, please see our website, www.c5mfg.com.

Warranty for replacement or repair shall not extend the original vendor warranty period. C5 Manufacturing does not warrant against normal wear or damages caused by abuse, negligence, poor maintenance, or operation beyond the rated capacities or intended uses. The warranty card must also be completed and returned to C5 Manufacturing within 30 days of purchase.

Please contact your dealer or contact C5 Manufacturing for all your replacement part needs.